Sat, 21 Feb 2009 14:42:48 +0000 http://www.pulsetone.biedmeer.nl/
The monolith effect special-purpose voltage-stabilized source,can simultaneously give 5 electric currents is in the 100mA effect.A voltage-stabilizer circuit design greater degree reduces the noise
Technical Description:
Input:

AC160-240V 50/60Hz
Output:

DC9V×5--400mA]]> Fri, 20 Feb 2009 12:59:23 +0000
PEDAL-POWER is specially designed using high quality transformers to power up stomp-box effects in pedal box, without interference, power surge, power trip or loss of power to your effects.

Slot 1-2 can power effects up to 1000mA or power up to 5 effect pedals simultaneously.

Slot 3-5 allows powering up to 100mA, suitable for most effect pedals in the market.

Slots 6-7 is designed based on the Boss ACA, suitable for Boss ACA effect pedals.

Slots 8-9 provides current of 6V of power for the Biyang OTD-100 tube distortion or any other 6v pedals that might fit.]]> Fri, 20 Feb 2009 12:56:14 +0000
Since being released in the market, NM-2 is Biyang’s most sought after pedal by musicians due to its design and impressive sound quality. To date NM-2 has made a breakthrough to give end-users more sounds for different types of music.
Metal-End follows closely to production specification of the Tonefancier. Making use of high quality parts and raw material. This is an effect never seen before on the market, which is able to produce tube –like sounding. If you are particular about your tone, GET THIS PEDAL!

Introduce：Metal pedal
Dimension：150mm(L)×128mm(W)×55mm(H)]]> Fri, 20 Feb 2009 12:51:37 +0000
Tonefancier series effects,which have used the high-class handwork effects as standard, with a high cost in adopting a lot of high-quality and well-known HI-FI audio parts and combined with classic circuits and good internal structure, have reached a very high quality level!

OD-7 took a reference from the classic circuits of Ibanez TS Series, using a lot of high quality stuffs such as the classic JRC4558 chips and German WIMA audio capacitance, High precision resistance,etc.At the sametime, OD-7 has a special 3 mode design of BIYANG. The TS mode is the classic TS-9 overdrive tone, and even more saturated.The BRIGHT mode will bring more bright,saturated, smooth distortion tone. The WARM mode is a warmly high gain tone.
Product Features:
Using classic JRC4558 chips for getting a kind of tube tone.
3 mode design
Using high quality stuffs such as German WIMA audio capacitance, High precision resistance etc...for signal transaction.
Entirely dust-proof rheostat, for long using life.
True bypass design.
Stainless metal panel and metal enclosure, luxury and durable.
Technical Description:
Connectors:

Input×1,Output×1,DC9V in×1
Power supply:

S-006/6F22 9Volt battery or DC9V adaptor
Current:

7mA
Input Impedance:

1MΩ
Size:

128mm(L)×94mm(W)×60mm(H)
Packing Info:
N.W/PC:

0.45kg
G.W/PC

0.5kg]]> Fri, 20 Feb 2009 12:47:52 +0000 A combination using high quality American chipset with famous classic circuitry to create a round, thick tone with lots of clarity which it very similar to Tube sounding. DS-8 will make your guitar tone stand out and cut through the rest.
Equipped with 3 modes; each mode offers a unique sounding via clipping of different diode. You will get a smooth and natural sounding from the Normal Mode, a higher output and thicker sound you will expect when you put two diodes in series from Turbo Mode and Extreme output and tons of sustain from the MAX Mode.

Introduce：Three modes distortion pedal
Dimension：128mm(L)×94mm(W)×60mm(H)]]> Fri, 20 Feb 2009 12:42:16 +0000
The BIYANG OTD-100 is a tube distortion powered by selected one 6AX7 vacuum tubes. Very natural sounding and highly sensitive. All-tube distortion the BIYANG OTD-100 unique paracyclic filter makes it the most versatile distortion ever! From warm overdrive to vacuum tube distortion sustain to the heaviest metal tube driven screams, you won't find a creamier distortion than the BIYANG OTD-100.
Product Features:
Using The Classic 6AX7 Electron Tube To Create The Splendid Distortion Tone, Rather Than Any "simulate Electron Tube" Or "acoustic Simulator"!
Adjusting Gain, High, Bass Can Get The Full Warmth Overdrive Tone, Or Smooth ,exquisite, Delay Solo Tone, Or The Heaviest Metal Tone.
Powered By Ac Adapter And Transformer That Drives 6AX7 Tubes To Maximum Voltage!
The True Bypass Mode Utilizes Pcb Relay Of Both Input And Output From The Signal Path To Eliminate The Loss Of Power And Clarity Often Caused By Other Devices
Heater Of Tube Is Powered By Dc To Avoid The Noise Of Unnecessary Buffer Stages And Preserve The Great Otd-100 Sound.
Setup Unique Biyang Interplay-jack For Footswitch, That May Match Any Single Biyang Effect Pedal For Switching Interplay


Technical Description:
Connectors:

Input×1,Output×1,Interplay×1,AC Adaptor×1
Tube:

6AX7(China)
Power Requirements:

AC6V(BIYANG AC0612A)
Current:

1A
Input Impedance:

1MΩ
Maximum:

60dB
Maximum Output Level:

1.2V
Packing Info:
N.W/PC

1.3kg
G.W/PC

1.5kg
PCS/CTN

40
Carton Measurement

690mm(l)x490mm(w)x400mm(h)
OEM

Available]]> Fri, 20 Feb 2009 12:38:54 +0000 CH-8 has added a Tone knob using a similar circuit to create a natural, clear and gentle chorus sound. It allows the creation of mellow to bright chorus tone.

Product Description:

Tonefancier series effects,which have used the high-class handwork effects as standard, with a high cost in adopting a lot of high-quality and well-known HI-FI audio parts and combined with classic circuits and good internal structure, have reached a very high quality level!

CH-8 is a chorus effect which using the analog circuits design, the tone is clean, natural, warm. The switch for two kind of speed controling makes it adjustable widely.
Product Features:
Using the analog circuits design
Two speed mode, more widely adjustable
Using high quality stuffs such as German WIMA audio capacitance, High precision resistance etc...for signal transaction.
Entirely dust-proof rheostat, for long using life.
True bypass design.
Stainless metal panel and metal enclosure, luxury and durable.
Technical Description:
Connectors:

Input×1,Output×1,DC9V in×1
Power supply:

S-006/6F22 9Volt battery or DC9V adaptor
Current:

15mA
Input Impedance:

1MΩ
Size:

128mm(L)×94mm(W)×60mm(H)]]> Fri, 20 Feb 2009 12:33:32 +0000 Analog circuitry design was used in AD-8 to simulate the old, pure analog sounding that guitarists were looking for! We incorporated 2 groups of chipsets to create the delay, greatly improved the delay fidelity and increasing the delay time realism. With the same millisecond settings, you will a very high audio fidelity that will get your audiences feeling what your are playing!]]> Fri, 20 Feb 2009 12:27:43 +0000
Tonefancier series effects,which have used the high-class handwork effects as standard, with a high cost in adopting a lot of high-quality and well-known HI-FI audio parts and combined with classic circuits and good internal structure, have reached a very high quality level!

AD-7 is a analog delay effect, max delay time is 1100ms(1.1s), and two modes: 20-600ms, 20-1100ms. this could help to fast control the delay time when playing.

Product Features:
Using the analog circuits design
Max deley time:1100ms(1.1s)
Using high quality stuffs such as German WIMA audio capacitance, High precision resistance etc...for signal transaction.
Entirely dust-proof rheostat, for long using life.
True bypass design.
Stainless metal panel and metal enclosure, luxury and durable.
Technical Description:
Connectors:

Input×1,Output×1,DC9V in×1
Power supply:

S-006/6F22 9Volt battery or DC9V adaptor
Current:

40mA
Input Impedance:

1MΩ
Size:

128mm(L)×94mm(W)×60mm(H)]]> Fri, 20 Feb 2009 12:22:08 +0000